High performance bar stock shears

Suitable for hot- and cold shearing of steel bars with appropriate pre-heating.
The SCHUBERT high-performance shears have been enhanced and based on the proven Peddinghaus principle, thus providing high technology levels.
Design features: a powerful drive catering for sufficient reserves at all levels of performance (i. e. 75 kW on the STS 450). The various models cover a range of bar sizes from approx. 8-180 mm in diameter. Our staff will only be too happy to give advic

STS 100

schubert
A small but powerful shear for processing bars up to 52 mm in diameter

Max. diameter: 52 mm
Max. cross section: 46 mm
Round bar* N/mm
450
52
650
44
850
38
Square bar N/mm
450
46
650
38
850
34
Rated shearing capacity
1000
No. of idle strokes/min
85
Drive kW
10
Standard length stop mm
0-500
Machine dimensions (hxwxd)
2300x2100x2100
Net weight (without hydraulics and equipment) kg
2500
Control
Siemens SPS S-7-300
Material in-feed height in mm
1300
*

when shearing without using the length stop the capacity increases by approx. 10%.

STS 100

STS 200

schubert
A high performance shear, preferably used in rod and chain manufacturing.

Max. diameter: 65 mm
Max. cross section: 55 mm
Round bar* N/mm
450
65
650
63
850
55
Square bar N/mm
450
55
650
55
850
48
Rated shearing capacity
2000
No. of idle strokes/min
68
Drive kW
37
Standard length stop mm
0-500
Machine dimensions (hxwxd)
2800x2200x2500
Net weight (without hydraulics and equipment) kg
9800
Control
Siemens SPS S-7-300
Material in-feed height in mm
1300
*

when shearing without using the length stop the capacity increases by approx. 10%.

STS 200

STS 450

schubert
Our premium product in the STS series.
Very efficient due to it's wide range of application.

Max. diameter: 90 mm
Max. cross section: 80 mm
Round bar* N/mm
450
90
650
90
850
80
Square bar N/mm
450
80
650
80
850
70
Rated shearing capacity
4500
No. of idle strokes/min
60
Drive kW
75
Standard length stop mm
0-500
Machine dimensions (hxwxd)
3750x2400x2720
Net weight (without hydraulics and equipment) kg
19600
Control
Siemens SPS S 7-300
Material in-feed height in mm
1300
Stroke mm
85
power of billet clamp daN
22903
connected load
400V/50Hz
minimum length of leading and trailing ends
1,5 x Ø / 0,75 x Ø
Nennstrom Antrieb Schere A
141
*

when shearing without using the length stop the capacity increases by approx. 10%.

STS 450

STS 800

schubert
An upper-class machine with a shearing range up to a diameter of 140 mm.

Max. diameter: 140 mm
Max. cross section: 135 mm
Round bar* N/mm
450
140
650
125
850
110
Square bar N/mm
450
135
650
110
850
100
Rated shearing capacity
8000
No. of idle strokes/min
40
Drive kW
110
Standard length stop mm
0-500
Machine dimensions (hxwxd)
4200x2400x3000
Net weight (without hydraulics and equipment) kg
36000
Control
Siemens SPS S-7-300
Material in-feed height in mm
1300
*

when shearing without using the length stop the capacity increases by approx. 10%.

STS 800

STS 1250

schubert
This machine developed by Schubert with a capacity of 12500 kN is currently the biggest and most powerful machine in the STS series and features a max. shearing diameter of approx. 180 mm (cold).

Max. diameter: 180 mm
Max. cross section: 170 mm
Round bar* N/mm
450
180
650
160
850
140
Square bar N/mm
450
170
650
150
850
130
Rated shearing capacity
14000
No. of idle strokes/min
35
Drive kW
160
Standard length stop mm
0-500
Machine dimensions (hxwxd)
6000x3250x3400
Net weight (without hydraulics and equipment) kg
80000
Control
Siemens SPS S-7-300
Material in-feed height in mm
1300
*

*when shearing without using the length stop the capacity increases by approx. 10%.

STS 1250

HSTS 45

schubert
Schubert has developed a new hydraulic shear of simple design.

Max. diameter: 32 mm
Max. cross section: 28 mm
Round bar* N/mm
450
32
650
27
850
24
Square bar N/mm
450
28
650
24
850
20
Rated shearing capacity
450
No. of idle strokes/min
50
Standard length stop mm
0-500
Machine dimensions (hxwxd)
1320x600x1550
Net weight (without hydraulics and equipment) kg
8000
Control
Siemens SPS S-7-300
Material in-feed height in mm
1300
Hydraulischer Antrieb kW
27
*

when shearing without using the length stop the capacity increases by approx. 10%.

HSTS 45

HFS 260

schubert
Rated shearing capacity
2600
No. of idle strokes/min
20
Drive kW
30
Standard length stop mm
1000
Machine dimensions (hxwxd)
2200x1600x1800
Net weight (without hydraulics and equipment) kg
5500
Control
Siemens SPS S-7-300
Material in-feed height in mm
950
Stroke mm
60
connected load
400V/50Hz
Nennstrom Antrieb Schere A
80
HFS 260

Caddy 50

schubert
Max. diameter: 50 mm
Max. cross section: 40 mm
Round bar* N/mm
450
50
650
40
850
30
Square bar N/mm
450
40
650
36
850
32
Rated shearing capacity
900
No. of idle strokes/min
45
Drive kW
11
Standard length stop mm
0-500
Machine dimensions (hxwxd)
1450x2140x1780
Net weight (without hydraulics and equipment) kg
2400
Control
SE-C50
Material in-feed height in mm
1000
connected load
400V/50Hz
minimum length of leading and trailing ends
1,5 x Ø / 0,75 x Ø
Nennstrom Antrieb Schere A
20
Caddy 50